Moderator: Community Manager
[Post Reply] [*]  Page 1 of 2  [ 13 posts ]  Go to page 1 2 »
Author Message
pepembr_mb
Post subject: Brazilian Modern Navy Corvettes Inhaúma and Barroso ClassesPosted: June 5th, 2018, 11:36 pm
Offline
Posts: 172
Joined: December 15th, 2016, 12:17 pm
In 1984, the Brazilian Navy began a program to built 12 corvettes derivated from a German OPV project. The first of them, Inhaúma, was launched in 1986 and delivered to the Esquadra in 1989. They were succeeded by the Barroso, a one ship class that will be my next project:


[ img ]


Top
[Profile] [Quote]
pepembr_mb
Post subject: Brazilian Modern Navy Corvettes Inhaúma and Barroso ClassesPosted: June 8th, 2018, 11:27 pm
Offline
Posts: 172
Joined: December 15th, 2016, 12:17 pm
This is the Barroso:

[ img ]


Top
[Profile] [Quote]
pepembr_mb
Post subject: Brazilian Modern Navy Corvettes Inhaúma and Barroso ClassesPosted: September 7th, 2018, 12:49 pm
Offline
Posts: 172
Joined: December 15th, 2016, 12:17 pm
I upgraded both designs:

[ img ]

[ img ]


Top
[Profile] [Quote]
heuhen
Post subject: Re: Brazilian Modern Navy Corvettes Inhaúma and Barroso ClassesPosted: September 10th, 2019, 7:58 pm
Offline
User avatar
Posts: 9049
Joined: December 15th, 2010, 10:13 pm
Location: Behind you, looking at you with my mustache!
as comment in the upload tread:

first off:

Inhaúma class:

- All superstructure should be in same color.
- hull shall have a darker grey color than the superstructure.
- Shading under overhang
- underwater hull shading isn't good
- Windows should be outlined with black.
- window color should be either standard Shipbucket blue (classic) or the new window color, that many artist is using.
- many of the "doors" have windows in them... they many of them should not have windows in them.
- I believe the ship is also laing a little lower in the water.
- the angle on the front of the superstructure is to steep. It should be more like this illustration:
[ img ]
- torpedo tubes, updated version:
[ img ]
- I think the 40mm look different, at the moment it look close to this one:
[ img ]
- lynx helicopter
[ img ]
- missiles should be shown above the ship

-----------------------------------
Barroso class:

- All superstructure should be in same color.
- hull shall have a darker grey color than the superstructure.
- Shading under overhang
- underwater hull shading isn't good
- Windows should be outlined with black.
- window color should be either standard Shipbucket blue (classic) or the new window color, that many artist is using.
- many of the "doors" have windows in them... they many of them should not have windows in them.
- some adjustment on the tip of the bow, it should be pointing more upward then suddenly go flat
- front of the superstructure goes down at an angle, almost all the way!
- all breaks that goes at an angle should be in grey. look at stern and front of the superstructure.
- remember missile above the ship, exempel:
[ img ]
- shape and height of mast not perfect.
- shape of the ruder is a little different:
[ img ]



There is many more, but start on these, and work on the details. then they will look nice and real.
an example on style, shading, color variation between superstructure and hull:
[ img ]
[ img ]
[ img ]


Top
[Profile] [Quote]
Blackbuck
Post subject: Re: Brazilian Modern Navy Corvettes Inhaúma and Barroso ClassesPosted: September 10th, 2019, 8:26 pm
Offline
Posts: 2741
Joined: July 27th, 2010, 9:15 am
Location: Birmingham, United Kingdom
I've said it before and I'll say it now that Lynx is incorrectly scaled and should be removed from the wiki.

_________________
AU Projects: | Federal Monarchy of Tír Glas| Other Ivernic Nations | Artemis Group |
Blood and Fire


Top
[Profile] [Quote]
pepembr_mb
Post subject: Re: Brazilian Modern Navy Corvettes Inhaúma and Barroso ClassesPosted: September 11th, 2019, 10:49 am
Offline
Posts: 172
Joined: December 15th, 2016, 12:17 pm
Blackbuck wrote: *
I've said it before and I'll say it now that Lynx is incorrectly scaled and should be removed from the wiki.
So, we need a new Linx! But this is the one available...


Top
[Profile] [Quote]
Blackbuck
Post subject: Re: Brazilian Modern Navy Corvettes Inhaúma and Barroso ClassesPosted: September 11th, 2019, 11:38 am
Offline
Posts: 2741
Joined: July 27th, 2010, 9:15 am
Location: Birmingham, United Kingdom
It's on the wiki already.

_________________
AU Projects: | Federal Monarchy of Tír Glas| Other Ivernic Nations | Artemis Group |
Blood and Fire


Top
[Profile] [Quote]
pepembr_mb
Post subject: Re: Brazilian Modern Navy Corvettes Inhaúma and Barroso ClassesPosted: September 11th, 2019, 12:40 pm
Offline
Posts: 172
Joined: December 15th, 2016, 12:17 pm
New Inhaúma version:

[ img ]

Some points
heuhen wrote: *
- All superstructure should be in same color.
This is not very realistic. I used photographs and newer plans as references.
heuhen wrote: *
- hull shall have a darker grey color than the superstructure.
- Shading under overhang
It already has both.
heuhen wrote: *
- underwater hull shading isn't good
I used some shadding used by Garlic Design
heuhen wrote: *
- Windows should be outlined with black.
- window color should be either standard Shipbucket blue (classic) or the new window color, that many artist is using.
Okay, I changed them
heuhen wrote: *
- many of the "doors" have windows in them... they many of them should not have windows in them.
- I believe the ship is also laing a little lower in the water.
I used photographs and newer plans as references.
heuhen wrote: *
- the angle on the front of the superstructure is to steep. It should be more like this illustration:
[ img ]
I used photographs and newer plans as references. This design is not very acurate.
heuhen wrote: *
- torpedo tubes, updated version:
[ img ]
Brazilian Navy uses a Brazilian torpedo launcher.
heuhen wrote: *
- I think the 40mm look different, at the moment it look close to this one:
[ img ]
Sorry, my 40 mm design is closer to the real thing.
heuhen wrote: *
- lynx helicopter
[ img ]
I changed it.
heuhen wrote: *
- missiles should be shown above the ship
Believe it or not, there's no Exocet MM40 at Shipbucket Equipment sheets. It would be a good idea to create one.

Cheers

Pepe


Top
[Profile] [Quote]
pepembr_mb
Post subject: Re: Brazilian Modern Navy Corvettes Inhaúma and Barroso ClassesPosted: September 11th, 2019, 12:41 pm
Offline
Posts: 172
Joined: December 15th, 2016, 12:17 pm
Now, I'll rework the Barroso.

Thank you!

Pepe


Top
[Profile] [Quote]
heuhen
Post subject: Re: Brazilian Modern Navy Corvettes Inhaúma and Barroso ClassesPosted: September 11th, 2019, 1:45 pm
Offline
User avatar
Posts: 9049
Joined: December 15th, 2010, 10:13 pm
Location: Behind you, looking at you with my mustache!
You can steal exocet MM4o missile from another drawing, you might find them on some older British frigates.

why the missile isn't on the partsheet... is beyond me


Top
[Profile] [Quote]
Display: Sort by: Direction:
[Post Reply]  Page 1 of 2  [ 13 posts ]  Return to “Real Designs” | Go to page 1 2 »

Jump to: 

Who is online

Users browsing this forum: No registered users and 46 guests


The team | Delete all board cookies | All times are UTC


cron
Powered by phpBB® Forum Software © phpBB Limited
[ GZIP: Off ]