As built
![[ img ]](https://www.dropbox.com/s/1yjxr268167s8en/ML_MB_NM_C1_Cariocal.png?raw=1)
Converted to corvette standard
![[ img ]](https://www.dropbox.com/s/rcw9y90lu9cu4yj/FS_MB_CV_C1_Carioca.png?raw=1)
| Shipbucket http://www.shipbucket.com/forums/ |
|
| World War II Carioca Minelayer http://www.shipbucket.com/forums/viewtopic.php?f=12&t=8528 |
Page 1 of 1 |
| Author: | pepembr_mb [ June 10th, 2018, 11:20 pm ] |
| Post subject: | World War II Carioca Minelayer |
As built Converted to corvette standard
|
|
| Author: | Hood [ June 11th, 2018, 7:53 am ] |
| Post subject: | Re: World War II Carioca Minelayer |
Nice work. I would change the railings for SB standard ones, but other than that this looks pretty good. |
|
| Author: | eswube [ June 17th, 2018, 8:02 am ] |
| Post subject: | Re: World War II Carioca Minelayer |
Indeed, the railings are non-standard, and I would seriously contemplate making the mainmast 3-pixel thick, but generally it's a nice work. 
|
|
| Author: | pepembr_mb [ June 18th, 2018, 3:26 pm ] |
| Post subject: | Re: World War II Carioca Minelayer |
Indeed, the railings are non-standard, and I would seriously contemplate making the mainmast 3-pixel thick, but generally it's a nice work.
Making the mast 3-pixel thick would get an unrealistic scale effect... It’s always a compromise between reality and rules. I also proposed some Brazilian WW1 destroyers that are in another post. I'm using Brazilian Navy photographs to make them.
|
|
| Author: | pepembr_mb [ June 18th, 2018, 3:27 pm ] |
| Post subject: | Re: World War II Carioca Minelayer |
Indeed, the railings are non-standard, and I would seriously contemplate making the mainmast 3-pixel thick, but generally it's a nice work.
I'll redone the rails.
|
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|