Shipbucket
http://www.shipbucket.com/forums/

1928 German Battlecruiser Design
http://www.shipbucket.com/forums/viewtopic.php?f=13&t=3529
Page 5 of 6

Author:  Syzmo [ March 30th, 2014, 4:48 pm ]
Post subject:  Re: 1928 German Battlecruiser Design

Absolutely you can use it.

Yea I just used the first parts I came across for these kitbashes since the original design is already on the mainsite and these were just me messing around to see what it would look like.

Really DG_Alpha its all your fault. These parts were fine a couple of years ago, then you started redoing all the German ships to impossibly high standards, making the rest of our drawing look bad.

Author:  KHT [ March 30th, 2014, 6:29 pm ]
Post subject:  Re: 1928 German Battlecruiser Design

Lookie good. :)
I must admit though, I can't quite understand why you'd put so big guns on such a lightly armoured hull... It feels rather suicidal. And costly. :P

Author:  Syzmo [ March 31st, 2014, 1:57 pm ]
Post subject:  Re: 1928 German Battlecruiser Design

Yea its pretty impracticable, although 4/3 the armament of Scharnhorst on 1/2 the displacement seems cheap to me.

I'm thinking about completely redrawing them all a little better now that DG_Alpha, maomatic, et all have raised the standard for German ships so high. I don't know if I'll get these to that level, but at the very least I'll steal their parts.

Author:  eltf177 [ April 1st, 2014, 4:25 pm ]
Post subject:  Re: 1928 German Battlecruiser Design

I've got an SS of the original design somewhere, IIRC it worked out pretty well. OTOH you've got a battlecruiser with no more armor than Deuschland, she's got no staying power and is in real trouble if Hood ever catches her!

Author:  Syzmo [ April 1st, 2014, 5:14 pm ]
Post subject:  Re: 1928 German Battlecruiser Design

I made a SS report (posted viewtopic.php?f=13&t=3529&start=30#p115666). I could not get the speed up to 34 knots without increasing the displacement well over 17,500 tons. Did you manage to find a way around that?

Author:  eltf177 [ April 2nd, 2014, 10:40 am ]
Post subject:  Re: 1928 German Battlecruiser Design

Syzmo wrote:
I made a SS report (posted viewtopic.php?f=13&t=3529&start=30#p115666). I could not get the speed up to 34 knots without increasing the displacement well over 17,500 tons. Did you manage to find a way around that?
I'm still looking for the SS, I hope I didn't lose it...

Author:  regemet [ April 2nd, 2014, 4:28 pm ]
Post subject:  Re: 1928 German Battlecruiser Design

What about a 1929 Seydlitz

Author:  Syzmo [ April 2nd, 2014, 6:26 pm ]
Post subject:  Re: 1928 German Battlecruiser Design

You mean the WWI era ship modernized or a never built design?

Author:  regemet [ April 3rd, 2014, 3:05 am ]
Post subject:  Re: 1928 German Battlecruiser Design

The WW1 ship modernized.

Author:  Rodondo [ April 3rd, 2014, 3:59 am ]
Post subject:  Re: 1928 German Battlecruiser Design

Hmm that would a a AU/Personal forum drawing then as Seydlitz joined the rest of the fleet at the bottom of Scarpa Flow

Page 5 of 6 All times are UTC
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/