| Shipbucket http://www.shipbucket.com/forums/ |
|
| France - Alsace class battleship http://www.shipbucket.com/forums/viewtopic.php?f=13&t=3626 |
Page 1 of 2 |
| Author: | alternathistory [ October 16th, 2012, 9:46 pm ] |
| Post subject: | France - Alsace class battleship |
This is my first work on the forum. To start submitted. My name is Dmitry I'm from Ukraine. Do not speak English so I can not answer deployed. All replies to this topic will distill over autotranslate. Of the forum participants only know a colleague ALVAMA. With whom I communicate on the Russian forum fai.org.ru ![[ img ]](http://alternathistory.org.ua/files/161012_alsace.png) ![[ img ]](http://alternathistory.org.ua/files/161012_alsace_01.jpg) The story of these ships can be found at: http://en.wikipedia.org/wiki/Alsace_class_battleship |
|
| Author: | Trojan [ October 16th, 2012, 9:50 pm ] |
| Post subject: | Re: France - Alsace class battleship |
Looks nice but the image seems to be blurred |
|
| Author: | BB1987 [ October 16th, 2012, 9:57 pm ] |
| Post subject: | Re: France - Alsace class battleship |
that's because the image seems to be resized, the scale bar is shorter. |
|
| Author: | KimWerner [ October 16th, 2012, 10:01 pm ] |
| Post subject: | Re: France - Alsace class battleship |
I'm very impressed! If it is your first drawing you might post it in beginners forum, but as I can see you have followed all sb rules. And very elegant. But there is an issue - as Trojan point out - the drawing seems blurred. It might have something to do with your image host, because when I uploaded the drawing on my pc it became ok  Edit: Yep, it's resized I can tell. |
|
| Author: | emperor_andreas [ October 16th, 2012, 10:13 pm ] |
| Post subject: | Re: France - Alsace class battleship |
Nice work! -Matt |
|
| Author: | BB1987 [ October 16th, 2012, 10:26 pm ] |
| Post subject: | Re: France - Alsace class battleship |
just a nitpicking, Alsace was actually on my worklist, but since you have already completed her while i have not even started to search reference or her is fine to you to go on (i mean it's not a problem); on the other hand you had mainly reworked Redhorse's Richelieu retaining at least the entire hull, so i suggest you to add his name on the credits line. |
|
| Author: | alternathistory [ October 17th, 2012, 8:28 am ] |
| Post subject: | Re: France - Alsace class battleship |
![[ img ]](http://s017.radikal.ru/i443/1210/5d/f1a094ad7688.png)
|
|
| Author: | emperor_andreas [ October 17th, 2012, 9:24 am ] |
| Post subject: | Re: France - Alsace class battleship |
Beautiful! -Matt |
|
| Author: | Gollevainen [ October 17th, 2012, 9:44 am ] |
| Post subject: | Re: France - Alsace class battleship |
Yes, everyone who registers himself into this forum and submits their drawings is expected to comply with the forum rules and regulations which can be found from this link. Most important is the crediting of orginal artists. |
|
| Author: | eltf177 [ October 17th, 2012, 2:38 pm ] |
| Post subject: | Re: France - Alsace class battleship |
Just as an FYI, this appears to be the largest design with 3 quad 15-inch turrets. Three designs were drawn up: 1) Smallest with 3 triple 15-inch turrets 2) An intermediate design with 3 triple 16-inch turrets 3) The largest with 3 quad 15-inch turrets As the quad 15-inch turret existed whereas neither the 16-inch gun nor a triple turret existed it was always assumed that the largest version would be chosen. However, according to FRENCH BATTLESHIPS the smallest design was chosen - apparently a team was visiting the UK where the triple 16-inch turrets for HMS "Lion" were to be built. |
|
| Page 1 of 2 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|