Uh, I just found her Springsharp file
, and she's got a 41m beam. Also, the purple box over mount 13 is the conning tower. The box above 14 is the bridge - I think. Please do not think I am criticizing, as you've made more progress in a couple of hours than I have in a year.
Edit: Descriptive text:
Two funnels for almost as much horsepower as an Iowa, four screws in skegs (electric drive) with four rudders. Two long-base rangefinders, one fore, one aft, the red funnel band, two cats amidships with a hangar (or a cross-deck, whichever works), two twin 20cm turrets as per the heavy cruiser on each beam with a 20cm director underneath the 45cm (the '45cm director is "superfiring"), then six twin 10cm/65 enclosed mounts on each beam, 6 triple 5cm AA on each beam and 4 twin 25mm/75 on the quarterdeck and forecastle for use against strafers.
Oh I just did it 15 minutes or so...
41 meter beam... well that is big. but I can fix that easy. Btw do you want the superstructure to be as beamy as possible or just a small and high superstructure on center line of the ship. or shall I redesign here and giver her one superstructure aft and one forward. BTW I am going to remove the superstructure under the mount 3, so she get a clean area around there.
But first I have to get to the shop and get some food.... I am bloody hungry now!