Moderator: Community Manager
[Post Reply] [*]  Page 4 of 5  [ 49 posts ]  Go to page « 1 2 3 4 5 »
Author Message
acelanceloet
Post subject: Re: Hamilton class FFgPosted: August 10th, 2014, 11:05 am
Offline
User avatar
Posts: 7496
Joined: July 28th, 2010, 12:25 pm
Location: the netherlands
I am only not certain if that sonar set can guide ASROC..... and if it is worthwile to fit Ikara with it. also, where is the reloader for Ikara? ikara reloads horizontal, and I see no space where it could do so from.

they all look nice though.

_________________
Drawings are credited with J.Scholtens
I ask of you to prove me wrong. Not say I am wrong, but prove it, because then I will have learned something new.
Shipbucket Wiki admin


Top
[Profile] [Quote]
rifleman
Post subject: Re: Hamilton class FFgPosted: August 10th, 2014, 11:51 am
Offline
Posts: 501
Joined: September 4th, 2010, 8:44 am
Ace re Ballyholme she is based on the Australian Navy refit for their Type 12's, That is the real life location of Ikara so they obviously managed it.

And Re the Millisle the towed array just shows the winches and the hull mounted sonars are just the protective cases. What the electronic equipment inside them isn't specified.

_________________
"There was nothing wrong with Titanic when she left the Shipyard" Tim McGarry Belfast Comedian


Top
[Profile] [Quote]
acelanceloet
Post subject: Re: Hamilton class FFgPosted: August 10th, 2014, 12:08 pm
Offline
User avatar
Posts: 7496
Joined: July 28th, 2010, 12:25 pm
Location: the netherlands
rifleman, the USN ASROC ships all had SQS-26, SQS-23 or SQS-53. all are quite a lot larger then these arrays are. an towed array would make Ikara logical (wasn't sure you had it fitted) but ASROC was normally guided with the hull mounted sonar IIRC.
https://dl.dropboxusercontent.com/u/632 ... ra%201.png
I have the Ikara magazine from the australian type 12 refits drawn out here. cannot see how you would work that into your vessel, to be honest.

_________________
Drawings are credited with J.Scholtens
I ask of you to prove me wrong. Not say I am wrong, but prove it, because then I will have learned something new.
Shipbucket Wiki admin


Top
[Profile] [Quote]
rifleman
Post subject: Re: Hamilton class FFgPosted: August 10th, 2014, 12:11 pm
Offline
Posts: 501
Joined: September 4th, 2010, 8:44 am
were the USN the only nation to use ASROC?

_________________
"There was nothing wrong with Titanic when she left the Shipyard" Tim McGarry Belfast Comedian


Top
[Profile] [Quote]
rifleman
Post subject: Re: Hamilton class FFgPosted: August 10th, 2014, 12:15 pm
Offline
Posts: 501
Joined: September 4th, 2010, 8:44 am
which Australian ships magazine have you copied Parramatta, Swan or DDG?

_________________
"There was nothing wrong with Titanic when she left the Shipyard" Tim McGarry Belfast Comedian


Top
[Profile] [Quote]
acelanceloet
Post subject: Re: Hamilton class FFgPosted: August 10th, 2014, 12:19 pm
Offline
User avatar
Posts: 7496
Joined: July 28th, 2010, 12:25 pm
Location: the netherlands
yarra: http://img853.imageshack.us/img853/3919/8g9.png
swan: http://i22.photobucket.com/albums/b336/ ... lation.jpg

the installations are about the same size.

_________________
Drawings are credited with J.Scholtens
I ask of you to prove me wrong. Not say I am wrong, but prove it, because then I will have learned something new.
Shipbucket Wiki admin


Top
[Profile] [Quote]
rifleman
Post subject: Re: Hamilton class FFgPosted: August 10th, 2014, 12:30 pm
Offline
Posts: 501
Joined: September 4th, 2010, 8:44 am
interesting ace because that's where the Ikara is situated

_________________
"There was nothing wrong with Titanic when she left the Shipyard" Tim McGarry Belfast Comedian


Top
[Profile] [Quote]
acelanceloet
Post subject: Re: Hamilton class FFgPosted: August 10th, 2014, 12:37 pm
Offline
User avatar
Posts: 7496
Joined: July 28th, 2010, 12:25 pm
Location: the netherlands
no. on your ship the ikara is much higher (half a deck from main deck level) then on the australian ships, where the deck where the ikara is is one full deck lower then the main deck. because of this, there fits an magazine next to the launcher on the australian ships, while that would not fit on yours.

_________________
Drawings are credited with J.Scholtens
I ask of you to prove me wrong. Not say I am wrong, but prove it, because then I will have learned something new.
Shipbucket Wiki admin


Top
[Profile] [Quote]
rifleman
Post subject: Re: Hamilton class FFgPosted: August 10th, 2014, 12:53 pm
Offline
Posts: 501
Joined: September 4th, 2010, 8:44 am
simple comes out of magazine onto weapon lift that takes it to loading position.

_________________
"There was nothing wrong with Titanic when she left the Shipyard" Tim McGarry Belfast Comedian


Top
[Profile] [Quote]
Blackbuck
Post subject: Re: Hamilton class FFgPosted: August 10th, 2014, 12:54 pm
Offline
Posts: 2741
Joined: July 27th, 2010, 9:15 am
Location: Birmingham, United Kingdom
:roll: Really, stop trying to justify a mistake. It's not befitting.

[ img ]
[ img ]

There is physically no way that Ikara could load from where you have it right now as there's nowhere the magazine could go.

You *could* however swap the Ikara and Sea Cat around, raise the quarterdeck to be full height having the Limbo pushed further aft with the relocated Sea Cat and then have Ikara feeding from a magazine placed in the superstructure.

_________________
AU Projects: | Federal Monarchy of Tír Glas| Other Ivernic Nations | Artemis Group |
Blood and Fire


Top
[Profile] [Quote]
Display: Sort by: Direction:
[Post Reply]  Page 4 of 5  [ 49 posts ]  Return to “Personal Designs” | Go to page « 1 2 3 4 5 »

Jump to: 

Who is online

Users browsing this forum: No registered users and 23 guests


The team | Delete all board cookies | All times are UTC


cron
Powered by phpBB® Forum Software © phpBB Limited
[ GZIP: Off ]