Here is my own version of a Yamato preliminary.
![[ img ]](http://i.imgur.com/prUr9eC.png)
| Shipbucket http://www.shipbucket.com/forums/ |
|
| IJN Battleship Izumo http://www.shipbucket.com/forums/viewtopic.php?f=15&t=7911 |
Page 1 of 2 |
| Author: | Shigure [ September 10th, 2017, 9:36 am ] |
| Post subject: | IJN Battleship Izumo |
Here is my own version of a Yamato preliminary.
|
|
| Author: | BB1987 [ September 10th, 2017, 10:46 am ] |
| Post subject: | Re: IJN Battleship Izumo |
Looks quite good with a more classic arrangement of main guns. If you like some suggestions, I'd raise the funnel a bit, getting it to the same height of the aft fire-control tower so the smoke can clear the aft director. The older 1920s Tosa turrets look a bit out of place on a late 30's design but I have something to improve that look. ![[ img ]](http://i.imgur.com/xEOj6JM.png) I've done this 16.1-inch gun turret for one oy my -yet to be featured- AU ships, you are free to use them in your drawing as well if you like. |
|
| Author: | Tobius [ September 10th, 2017, 4:39 pm ] |
| Post subject: | Re: IJN Battleship Izumo |
Your radio aerials are interesting. Not a criticism, but an observation: how does gun house rotation of A, B, C and Y turrets to beam bearing affect the guying? |
|
| Author: | BB1987 [ September 10th, 2017, 5:24 pm ] |
| Post subject: | Re: IJN Battleship Izumo |
Your radio aerials are interesting. Not a criticism, but an observation: how does gun house rotation of A, B, C and Y turrets to beam bearing affect the guying?
If he removes the radio antenna from the first main gu turret (right now it interferes end-on fire from the 155mm gun mount superfiring behind it) he'll' get a perfectly workable system. The point where the wires connect to the antennas on top of the turrets can swivel, it's the same setup as the IJN Yamato
|
|
| Author: | Tobius [ September 10th, 2017, 5:46 pm ] |
| Post subject: | Re: IJN Battleship Izumo |
And that in RTL did not work off in San Bernardino Strait and off Samar when Yamato's aerials snarled and her radios failed. Just sayin. |
|
| Author: | acelanceloet [ September 10th, 2017, 5:49 pm ] |
| Post subject: | Re: IJN Battleship Izumo |
hindsight is forbidden when drawing never build designs. 
|
|
| Author: | Krakatoa [ September 10th, 2017, 6:55 pm ] |
| Post subject: | Re: IJN Battleship Izumo |
The armour belt may need a little bit of tweaking. You have four holders on the back half of the belt but only a bit of one on the front half. Either there would be four on the front half as well, or delete all the holders. |
|
| Author: | Shigure [ September 10th, 2017, 8:11 pm ] |
| Post subject: | Re: IJN Battleship Izumo |
I really appreciate the turrets! I've removed the antenna from the number two turret and increased the height of the funnel.
|
|
| Author: | Hood [ September 11th, 2017, 8:20 am ] |
| Post subject: | Re: IJN Battleship Izumo |
I this this design, its a nice take on a more realistic battleship than some of the super-Yamato designs we normally see. |
|
| Author: | Keisser [ September 12th, 2017, 4:15 am ] |
| Post subject: | Re: IJN Battleship Izumo |
Great job Tristan, I really love this design. Yay for you! |
|
| Page 1 of 2 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|