Shipbucket
http://www.shipbucket.com/forums/

Swedish parts
http://www.shipbucket.com/forums/viewtopic.php?f=16&t=4595
Page 4 of 9

Author:  acelanceloet [ February 2nd, 2014, 2:56 pm ]
Post subject:  Re: Swedish parts

looks good (thus better then the original) to me
added to belowdecks parts.

Author:  erik_t [ February 2nd, 2014, 5:23 pm ]
Post subject:  Re: Swedish parts

The creases and joints seem much better defined to me now.

Author:  acelanceloet [ June 19th, 2014, 3:11 pm ]
Post subject:  Re: Swedish parts

is there any progress on the checkup of the 57 mm/60 (2.25") SAK Model 1950? otherwise I will just fix an drawing of the part as placed on the Zeven Provincien cruiser, which should be the same as the one of the Halland Class

Author:  KHT [ June 19th, 2014, 3:27 pm ]
Post subject:  Re: Swedish parts

Zip. Have fun. :)

Author:  acelanceloet [ June 19th, 2014, 3:33 pm ]
Post subject:  Re: Swedish parts

that means I can start? right. also, the turret 'that just needed some polishing' for the 150mm, was I suppose only that used for the tre kronor? as in, the dutch was IIRC somewhat different (postwar production) but if you could upload/send what you have of that (just the sb drawing, I have good refs for the dutch version) so we can start of the same, that might be helpful? :P

Author:  KHT [ June 19th, 2014, 4:00 pm ]
Post subject:  Re: Swedish parts

Check your inbox. :)

Author:  heuhen [ June 19th, 2014, 6:12 pm ]
Post subject:  Re: Swedish parts

I have updated the main page. I anyone have something new parts, information, etc.: "Let it rain!" I will occasional draw, but mostly collect parts from you girls.... boys!

Author:  acelanceloet [ June 19th, 2014, 6:17 pm ]
Post subject:  Re: Swedish parts

Heuhen, there are 2 Mk 3/Mk 110 mountings now. you should also check how much difference there is between the mountings as fitted on the dutch ships and the mounts by bofors, IIRC they are a modified variant but still largely build by bofors, in which case they are suitable for this sheet as well, I think?

Author:  heuhen [ June 19th, 2014, 6:52 pm ]
Post subject:  Re: Swedish parts

after what I understand on the 57mm family the mk2 and mk3 (ex mk110) the turret housing is similar. And after I understand Stockholm class have mk2.

yes most guns are modified for different navy's, so yeah there should be some difference. just like the 152mm you posted in bellow deck... (Is that version the Swedish or?)


What I think I can do is to have Swedish made equipment/weapon on one line, and in the line next to it I have international version of them.

That can give us this look:

[ img ]

Author:  acelanceloet [ June 19th, 2014, 6:57 pm ]
Post subject:  Re: Swedish parts

http://www.navweaps.com/Weapons/WNSwede ... k2_pic.jpg Mk 2
http://www.navweaps.com/Weapons/WNSwede ... k3_pic.jpg Mk 3/ Mk 110

I cannot find an Mk 3 having the same shield as the Mk 2, so they should not have the same sb drawing, right?

Page 4 of 9 All times are UTC
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/