Shipbucket
http://www.shipbucket.com/forums/

Swedish parts
http://www.shipbucket.com/forums/viewtopic.php?f=16&t=4595		 Page 5 of 9
Author:  heuhen [ June 19th, 2014, 7:00 pm ]
Post subject:  Re: Swedish parts
then it looks like we have been using wrong drawing for mk3 all this years!
Author:  acelanceloet [ June 19th, 2014, 7:04 pm ]
Post subject:  Re: Swedish parts
correct :P
however, on most real designs where these have been used (LCS 2 for example) this mistake has not been made.

note that there are other variants as well, the ones used on the visby and the one to be used on the zumwalt. those are Mk 3 mountings underneath IIRC, but with different shields.
Author:  acelanceloet [ June 20th, 2014, 8:31 pm ]
Post subject:  Re: Swedish parts
[ img ]
image says it all. an copy of this same file is in the belowdeck parts thread as well
Author:  heuhen [ June 20th, 2014, 9:54 pm ]
Post subject:  Re: Swedish parts
acelanceloet wrote:
[ img ]
image says it all. an copy of this same file is in the belowdeck parts thread as well
excellent work "Acelanceloet"




I have updated the main page with an new sheet. this one is for guns after year... to today.

many of the guns need work (they are old), if anyone of you boys and girls want to do it, I will be very happy. if not, just stick reference drawings/picture in here and someone (me or..) will do it!
Author:  KHT [ June 20th, 2014, 10:41 pm ]
Post subject:  Re: Swedish parts
I think I'll try and sit down some day now and revisit the 120mm M/24. I've noted some errors, and then there's the fact that I've only portrayed the version used on the Göteborg class, while there were... four or so different shield mounts for that particular gun.
Author:  acelanceloet [ August 3rd, 2014, 7:51 pm ]
Post subject:  Re: Swedish parts
[ img ]
[ img ]
[ img ]
[ img ]

may I suggest these for the swedish parts sheet, and the swedish / bofors parts sheet for the current upload session? I am sorting out the dutch parts sheet and the above are designed by request of the dutch navy but were designed and build by bofors and sometimes assembled in the netherlands. for that reason I think they are best here, but otherwise I will add them to the dutch parts sheet as 'designed by bofors for the dutch'
Author:  Gollevainen [ August 4th, 2014, 5:29 am ]
Post subject:  Re: Swedish parts
Quote:
may I suggest these for the swedish parts sheet, and the swedish / bofors parts sheet for the current upload session?
Im not going to upload any sheets or other non standard material in this uploading session, which by nature is just sort of temporal remedy in wait for the new site. Its sole purpose is to not get the gap between uploads widen too much and therefore risking us loosing some quality material.
Author:  heuhen [ August 4th, 2014, 7:50 am ]
Post subject:  Re: Swedish parts
I Will just collect Them in to one sheet. So it's easier to find.
Author:  Gollevainen [ August 4th, 2014, 8:04 am ]
Post subject:  Re: Swedish parts
Why don't you guys just make a Bofors part sheet? Since we can do any sheets we like, no one is forcing you guys to think with nationalities solely.
Author:  acelanceloet [ August 4th, 2014, 7:59 pm ]
Post subject:  Re: Swedish parts
I may be incorrect, but IIRC back when we worked on the parts sheet renewal it was forbidden to use 'company' parts sheets? I was told back then to just sort it to nations and nothing else would be used..... I think by you, gollevainen?
Page 5 of 9 All times are UTC
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/