Shipbucket
http://www.shipbucket.com/forums/

Swedish parts
http://www.shipbucket.com/forums/viewtopic.php?f=16&t=4595
Page 8 of 9

Author:  heuhen [ September 29th, 2015, 9:41 pm ]
Post subject:  Re: Swedish parts

NickD wrote:
Sorry, cant manage the dropbox, changed to a link.
you have to copy the public link. you go in to you'r dropbox folder on you'r computer, and just right click the file, and copy the public link, by just right click the file.

or if you go on the web page:

- go to the public folder on dropbox.com.
- right click on the drawing you wand to share with us.
- click on "copy public link"
- past it in to here, and add IMG-tag around

Author:  NickD [ September 29th, 2015, 9:47 pm ]
Post subject:  Re: Swedish parts

Ok, done. Is it now visible?
[ img ]

Author:  JSB [ September 29th, 2015, 10:39 pm ]
Post subject:  Re: Swedish parts

NickD wrote:
Ok, done. Is it now visible?
[ img ]
[cut img]https://www.dropbox.com/s/wrthf9yzdxd6r ... 4.png?dl=0[]
put in []https://dl.dropboxusercontent.com[]
to give []https://dl.dropboxusercontent.com/s/wrt ... 4.png?dl=0[]

Author:  NickD [ September 30th, 2015, 4:12 pm ]
Post subject:  Re: Swedish parts

105mm updated, using photos from Karlskrona naval museum. Added 120mm front views. I tried to make them much possible detailed in this resolution. If no one has objections, this will be the last version.

Author:  odysseus1980 [ February 19th, 2017, 5:05 pm ]
Post subject:  Re: Swedish parts

In old part sheets we had RBS15 boxes in 2 angles (30-40 deg? the most usual configuration) and also boxes angles at 90 deg (transverse configuration). Somewhere we have the former, but no latter.

Author:  heuhen [ February 19th, 2017, 6:39 pm ]
Post subject:  Re: Swedish parts

It think it come down to, is it easy to draw, then we draw it. but if it is hard to draw and make look correct and easy to see what it is... basically people are lazy! I'm lazy to, there are many drawings that I could made even more awesome... but I am just me, the usual me lazy as F*** unless it's at work, there I am almost like an "Hero"!

Author:  phu2000 [ June 5th, 2017, 12:58 pm ]
Post subject:  Re: Swedish parts

I have several questions about the 15.2/53 gun mount and the 53cm Torpedo :?:

- on Tre Kronor, what is the different between two type of those aft twin turret? does it has something to do with the rangefinder?

- what is the turret window(?) on De Zeven mounting use for? (also the 120mm M/50)

- did the quintuple 53cm torpedo available pre-war or during WW2? or it was developed post-war for Halland-class?

- is there any details on the 53cm torpedo that Swedish navy use during WW2? AFAIK Halland originally use the Torped 14, but don't know if it was developed pre-war or later.

Author:  acelanceloet [ June 5th, 2017, 2:03 pm ]
Post subject:  Re: Swedish parts

phu2000 wrote: *
- on Tre Kronor, what is the different between two type of those aft twin turret? does it has something to do with the rangefinder?
As far as I know, only the addition of an on-mount rangefinder. I am not certain though, somebody more versed in the bofors weapons might improve on that answer
phu2000 wrote: *
- what is the turret window(?) on De Zeven mounting use for? (also the 120mm M/50)
Local fire control. basically an on-mount spotting position.

Author:  heuhen [ June 5th, 2017, 3:24 pm ]
Post subject:  Re: Swedish parts

tre kronor: the superfiring turret have rangefinder, other than that...

Author:  phu2000 [ June 15th, 2017, 4:20 pm ]
Post subject:  Re: Swedish parts

thank you :D

Page 8 of 9 All times are UTC
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/