Moderator: Community Manager
[Post Reply] [*]  Page 1 of 1  [ 5 posts ] 
Author Message
TimothyC
Post subject: Air Capable SpruancesPosted: November 13th, 2011, 6:37 pm
Offline
User avatar
Posts: 3765
Joined: July 27th, 2010, 3:06 am
Contact: Website
Images from Layman and McLaughlin's The Hybrid Warship: The Amalgamation of Big Guns and Aircraft

Air Capable Spruance Refit from Grumman, this is the one called "Sante Fe":

[ img ]


Adams and Rains Through-Deck Spruance concept:

[ img ]


DDH-997 as approved by the US Congress - Never built:

[ img ]


Commander Ghiradella's proposal as posted in in the July 1978 edition of Proceedings:

[ img ]

Relevant text:
Quote:
The air defence and ASW potential of VTOL aircraft has led to the consideration of a new type of vessel, the 'air-capable' warship. There are links between the modern air-capable ship and the flying-deck cruiser of the 1930s, both in form and intended functions; another interesting reflection of the 1930s is the fact that the air-capable ship has come at one point to the attention of the US Congress.

In the Fiscal Year 1978 shipbuilding programme, Congress approved the construction of a single air-capable Spruance (DD963) class destroyer. This would have involved simply increasing the size of the hangar and flight deck, allowing the ship to operate up to four helicopters, or, ultimately, some form of VTOL aircraft. The US Navy did not really want this ship, and in the end managed to get the funds redirected to a standard unit of the class. However, the basic idea has inspired several other projects.

One of the earliest of these designs to appear was the work of Dean A Rains and Donald B Adams, both of Ingalls Shipbuilding Division, for a 'flight deck DD 963'. This proposal resembled Croker's 'through-deck cruiser', and called for a complete revision of the Spruance design. The beam would be increased from 55ft to 68ft, the superstructure would be rearranged and a hangar built on the main deck; there would be a flight deck forward of the hangar, including a ski-jump in some versions of the design, and a landing deck abaft it. In no meaningful sense a hybrid, this was really an attempt at a small carrier.

Another Spruance conversion design was worked out by the Grumman/Santa Fe Corporation and bears a strong resemblance to traditional hybrids. This scheme is one of several proposed 'mid-life' modernisations of the Spruance class ships. It shows the basic destroyer design from the bow to the after superstructure, but aft a large hangar has been built onto the hull, with a flight deck above. The resulting 9000 ton ship could embark as many as eight helicopters or four ASW VTOL aircraft; the sketches show an early version of the never-built Grumman turbofan Model 698 aircraft. This gull-winged aircraft featured swivelling engine nacelles attached to the fuselage and was intended to travel at up to 500 knots.

Still another Spruance-based VTOL design bore a strong resemblance to HMS Invincible and was intended to provide the advantages of STOL operations. Proposed by Commander Ronald J Ghiradella, US Naval Reserve, it featured a basic Spruance hull lengthened to 606ft overall; the gas turbine uptakes are trunked to starboard where an island superstructure is located, making room for a 470ft flight deck angling to port. Forward, there are conventional weapons: a 5in gun and Harpoon anti-ship missile canisters, with 30mm guns sited on each quarter to provide close-in AA defence, and a Basic Point Defense Missile System is

located aft of the island. There is a long, narrow lift (62ft by 26ft) aft of the island. Ghiradella foresees two hangar decks, the main one on the original main deck, with a lower hangar deck extending from the lift aft to the stern. In spite of the fact that the lift is too narrow to handle Harriers, Ghiradella gives the aircraft complement as twelve 'medium-sized' helicopters and four 'Harrier-type' aircraft.

_________________
πŒπ€π“π‡ππ„π“- 𝑻𝒐 π‘ͺπ’π’ˆπ’Šπ’•π’‚π’•π’† 𝒂𝒏𝒅 𝒕𝒐 𝑺𝒐𝒍𝒗𝒆


Top
[Profile] [Quote]
Biancini1995
Post subject: Re: Air Capable SpruancesPosted: November 18th, 2011, 12:05 am
Offline
User avatar
Posts: 744
Joined: August 19th, 2011, 7:54 pm
the last plan looks like a baby Kiev^^

_________________
Verusea Alternative Universe is starting to build up.


Top
[Profile] [Quote]
Radome
Post subject: Re: Air Capable SpruancesPosted: November 18th, 2011, 2:11 am
Offline
User avatar
Posts: 1145
Joined: April 15th, 2011, 10:57 pm
Location: Jerusalem, Israel
I'd like to do the 3ed one if no one is doing it already :)

_________________
- - -> My Worklist! <- - -


Top
[Profile] [Quote]
TimothyC
Post subject: Re: Air Capable SpruancesPosted: November 18th, 2011, 6:10 am
Offline
User avatar
Posts: 3765
Joined: July 27th, 2010, 3:06 am
Contact: Website
Hood is working on Number 3. The rest are drawn, but in lower quality. They could use an upgrade/redrawn from the latest Spruances that Ace has done.

_________________
πŒπ€π“π‡ππ„π“- 𝑻𝒐 π‘ͺπ’π’ˆπ’Šπ’•π’‚π’•π’† 𝒂𝒏𝒅 𝒕𝒐 𝑺𝒐𝒍𝒗𝒆


Top
[Profile] [Quote]
MihoshiK
Post subject: Re: Air Capable SpruancesPosted: November 18th, 2011, 11:58 pm
Offline
User avatar
Posts: 1035
Joined: October 16th, 2010, 11:06 pm
Location: In orbit, watching you draw.
Contact: Website
TimothyC wrote:
Hood is working on Number 3. The rest are drawn, but in lower quality. They could use an upgrade/redrawn from the latest Spruances that Ace has done.
I distinctly recall drawing No. 3, but I'm not going to complain when it's redrawn. The Sprucans have been greatly updated, and that one needs it too.

_________________
Would you please not eat my gun...
[ img ]


Top
[Profile] [Quote]
Display: Sort by: Direction:
[Post Reply]  Page 1 of 1  [ 5 posts ]  Return to β€œSources and Reference Drawings”

Jump to: 

Who is online

Users browsing this forum: No registered users and 13 guests


The team | Delete all board cookies | All times are UTC


cron
Powered by phpBB® Forum Software © phpBB Limited
[ GZIP: Off ]