Shipbucket
http://www.shipbucket.com/forums/

Eagle Patrol Boats, WW1
http://www.shipbucket.com/forums/viewtopic.php?f=18&t=2395
Page 1 of 5

Author:  Zephyr [ December 28th, 2011, 7:29 pm ]
Post subject:  Eagle Patrol Boats, WW1

Well, I believe I have the basic hull and major deck stuff mostly done, just need to start with some details now.

[ img ]

[ img ]

The Eagle Patrol Boats were an interesting class in that they are, to my knowledge, the only warships ever built on an assembly line. In 1918, Pres. Wilson asked Henry Ford to serve on the Shipping Board. Ford came up with the idea of building ships on an assembly line, the same as he did with his cars. The Eagles were the result of that.
Built in a factory in a suburb of Detroit, they were indeed assembly line built. Using flanged flat plate steel for the hulls instead of rolled plate, they went together fairly quickly. The only problem was that they weren't on the water. So, once one was finished, they loaded it onto a large flatcar pulled by tractors, slowly moved it to the water, then lowered it in on a hydraulic platform. Definately not your traditional launching. Initially a class of 100 was planned, increased to 112, then at the end of the war reduced to 60.
Class overview
Name: Eagle
Operators: United States Navy
Completed: 60
General characteristics
Type: Patrol craft
Displacement: 615 long tons (625 t)
Length: 200.8 ft (61.2 m)
Beam: 33.1 ft (10.1 m)
Draft: 8.5 ft (2.6 m)
Propulsion: Poole geared steam turbine, 2,500 shp (1,864 kW)
1 screw
Speed: 18.32 knots (33.93 km/h; 21.08 mph)
Complement: 5 officers, 56 men
Armament: • 2 × 4"/50 caliber guns
• 1 × 3"/50 caliber gun
• 2 × .50-caliber machine guns
• 1 × Y gun (Eagles 4 through 7 only)

Author:  WhyMe [ December 28th, 2011, 7:32 pm ]
Post subject:  Re: Eagle Patrol Boats, WW1

Nice start. Although portholes are to small for a ship of this size.
You might want to check out HNSA's booklet of general plans; they've got plans for the Eagle boat.

Author:  Zephyr [ December 28th, 2011, 7:41 pm ]
Post subject:  Re: Eagle Patrol Boats, WW1

Thanks. I was looking for something like that. As for the ports, if you look at the pic, and at the plans, they are rather on the smallish size, except for the ones in the con. Besides, they really aren't ports, they are air vents.

Author:  klagldsf [ December 29th, 2011, 1:57 am ]
Post subject:  Re: Eagle Patrol Boats, WW1

At this level of completion, a respectable effort so far.

Author:  Carthaginian [ December 29th, 2011, 5:23 am ]
Post subject:  Re: Eagle Patrol Boats, WW1

A great drawing... it captures the truly ugly appearance of these ships beautifully!

Author:  klagldsf [ December 29th, 2011, 5:51 am ]
Post subject:  Re: Eagle Patrol Boats, WW1

They were no doubt designed to be built, so to say, but the sloping deck is a curiosity.

Author:  eswube [ December 29th, 2011, 9:01 am ]
Post subject:  Re: Eagle Patrol Boats, WW1

Looks good so far. I'm looking forward to see it finished. :)

Author:  Thiel [ December 29th, 2011, 9:21 am ]
Post subject:  Re: Eagle Patrol Boats, WW1

Nice start, but remember that any platform capable of supporting a man should be three pixels thick.
Also, navsource.org has a ton of images of the PE boats.

Author:  Zephyr [ December 29th, 2011, 12:29 pm ]
Post subject:  Re: Eagle Patrol Boats, WW1

Gonna put this one "on hold" temporarily, I need to kitbash a 1908-1912 era light cruiser. Shouldn't be long.

Author:  Portsmouth Bill [ December 29th, 2011, 3:25 pm ]
Post subject:  Re: Eagle Patrol Boats, WW1

Impressive Zephyr; this represents a novel and (historically) significant design. What also fascinates me is that while in 1918 a mass-produced warship was being built, by 1941 the US had forgotten the lessons of WWI, hence the 'Happy times' off the US coast amongst U-boats.

Page 1 of 5 All times are UTC
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/