Shipbucket

Hi cvbbdd,

I've done a drawing to show you what I meant:



See how your turret has the guns more widely spaced on a smaller barbette? Because the turret's so short you can't fit in a bigger barbette, making the gunlaying very cramped.

Also, the AA cruiser looks formidable, but the turrets you've shown have significant deck penetration, I think. I'm not sure if you've left room for the engines on this design.

Regards,
Adam

_________________
Public Service Announcement: This is the preferred SB / FD font.

NSWE: viewtopic.php?f=14&t=5695

I am not sure which turrets are higher or lower than the others, but assuming there is a deck height difference implied by the color difference some of those turrets don't have room to rotate.

parts sheet update

Heavy AA cruiser update

_________________
I love alternate WWII history
i will edit or upgrade most posts, all previous images are on my devinart page
http://daa14.deviantart.com/ I am a concept artist I/E guns hull
good stuff starts on page 10
work list:

• USS Kearsarge crane ship No. 1(on hold) need pics
  top down weapon and plane sheets

On the Heavy AA Cruiser, I don't think the 2 big turrets closest to the center can turn, or perhaps 20 degrees each side rendering them useless, because the cannons can't lower because of the other turret. I'd suggest removing those turrets.

...

_________________

Jabba's Worklist

This is why people stop helping people.

_________________
AU Projects: | Federal Monarchy of Tír Glas| Other Ivernic Nations | Artemis Group |
Blood and Fire

is this good

_________________
I love alternate WWII history
i will edit or upgrade most posts, all previous images are on my devinart page
http://daa14.deviantart.com/ I am a concept artist I/E guns hull
good stuff starts on page 10
work list:

• USS Kearsarge crane ship No. 1(on hold) need pics
  top down weapon and plane sheets

Hi cvbbdd,

I *think* Fox meant your B and X turrets, which seem to be so close to your A and Y turrets, respectively, that they'll hit them when they try to turn, rather than your 5"/38 turrets.

Regards,
Adam

_________________
Public Service Announcement: This is the preferred SB / FD font.

NSWE: viewtopic.php?f=14&t=5695

_________________
I love alternate WWII history
i will edit or upgrade most posts, all previous images are on my devinart page
http://daa14.deviantart.com/ I am a concept artist I/E guns hull
good stuff starts on page 10
work list:

• USS Kearsarge crane ship No. 1(on hold) need pics
  top down weapon and plane sheets

As an AA cruiser, it should be able to make enough power to at least reach 30 knots, if not more, on a hull which seems to be 143m long and about 21m wide, it's probably requiring around 75,000-100,000+ horsepower to make speed, most likely either requiring a second funnel aft or a much larger and higher trunked funnel for the machinery.

I dont really see the point the waist single 5" guns, especially since you have 12 other 5" guns which could cover the same area instead.

Another thing that most certainly needs to be considered are directors and early radar, not to mention masts, mooring equipment, ventilation, navigation spaces, ship's boats and rafts, searchlights ETC, the list goes on. Some of these things will effect the placement or effeciency of a gun mount.

_________________
Work list(Current)
Miscellaneous|Victorian Colonial Navy|Murray Riverboats|Colony of Victoria AU|Project Sail-fixing SB's sail shortage
How to mentally pronounce my usernameRow-(as in a boat)Don-(as in the short form of Donald)Dough-(bread)
"Loitering on the High Seas" (Named after the good ship Rodondo)
There's no such thing as "nothing left to draw" If you can down 10 pints and draw, you're doing alright by my standards