Moderator: Community Manager
[Post Reply] [*]  Page 1 of 1  [ 8 posts ] 
Author Message
DigitalShipyard
Post subject: Three Masted Schooner ProjectPosted: March 7th, 2012, 12:59 pm
Offline
Posts: 30
Joined: July 28th, 2011, 2:26 pm
Location: Michigan
Contact: Website
A slight departure from Great Lakes ships that I normally draw, but it was time to do this project that I have been wanting to do for a few years now. In my family history there was a fleet of 7 wooden schooners built in the town my father grew up, Belliveau Cove, Nova Scotia. Below you see one of them, the Emma Belliveau (1916-1920). I also created an entire website about these ships with pictures and history, if you have the time please take a look.

http://www.boatnerd.com/digitalshipyard ... s/home.htm

[ img ]

[ img ]

~John


Last edited by DigitalShipyard on May 1st, 2012, 1:06 pm, edited 1 time in total.

Top
[Profile] [Quote]
Lazer_one
Post subject: Re: Three Masted Schooner ProjectPosted: March 7th, 2012, 8:43 pm
Offline
User avatar
Posts: 1453
Joined: July 27th, 2010, 5:58 am
Location: Milan - Italy
Contact: Website
Very fine!
Just for curiosity: why you draw her with the bow on left?

_________________
Lazer_One
[ img ]

Lazer_One's Worlist - Updated 2021

Documentation is always welcome here

Lazer_One's Blog


Top
[Profile] [Quote]
DigitalShipyard
Post subject: Re: Three Masted Schooner ProjectPosted: March 8th, 2012, 12:56 pm
Offline
Posts: 30
Joined: July 28th, 2011, 2:26 pm
Location: Michigan
Contact: Website
Hi Lazer One, Thanks! Most of the ships I've drawn are showing the starboard side, bow on the right, basically because most of the shipyard blueprints I obtain are that way. (The exception being the ships that were built by Toledo Shipbuilding, for some reason they drew thier blueprints showing the port side, bow left - ie. Chief Wawatam, and Reiss Brothers.) With this schooner I had that choice to make. There are no blueprints to reference, but I do have a half-hull model that was carved by one of the ship-wrights back then, bow left, I used this for the basic shape the to look at how the light and shadow played for the shading of the hull. I also have drawings my uncle drew some time back detailing schooner construction, also showing the port side and most of my reference pictures of the actual ships of this era seemed to be from the port side. So I simply fealt it would be logical for me to depict her that way.


Top
[Profile] [Quote]
Lazer_one
Post subject: Re: Three Masted Schooner ProjectPosted: March 8th, 2012, 1:48 pm
Offline
User avatar
Posts: 1453
Joined: July 27th, 2010, 5:58 am
Location: Milan - Italy
Contact: Website
Could you post pictures of the half-hull? Or maybe send a PM...
Thanks

_________________
Lazer_One
[ img ]

Lazer_One's Worlist - Updated 2021

Documentation is always welcome here

Lazer_One's Blog


Top
[Profile] [Quote]
DigitalShipyard
Post subject: Re: Three Masted Schooner ProjectPosted: March 8th, 2012, 11:05 pm
Offline
Posts: 30
Joined: July 28th, 2011, 2:26 pm
Location: Michigan
Contact: Website
Take a look in the section called "Shipbuilding" on this site and you will see pictures of the half hull:

http://www.boatnerd.com/digitalshipyard ... s/home.htm

(Hopefully link will work, if not, let me know and I put the pictures up)

~John


Top
[Profile] [Quote]
Wolfman
Post subject: Re: Three Masted Schooner ProjectPosted: March 9th, 2012, 6:45 pm
Offline
Posts: 254
Joined: July 26th, 2011, 6:48 pm
DigitalShipyard wrote:
A slight departure from Great Lakes ships that I normally draw, but it was time to do this project that I have been wanting to do for a few years now. In my family history there was a fleet of 7 wooden schooners built in the town my father grew up, Belliveau Cove, Nova Scotia. Below you see one of them, the Emma Belliveau (1916-1920). I also created an entire website about these ships with pictures and history, if you have the time please take a look.

http://www.boatnerd.com/digitalshipyard ... s/home.htm

~John
Nice piece of work.


Top
[Profile] [Quote]
CanisD
Post subject: Re: Three Masted Schooner ProjectPosted: March 9th, 2012, 8:35 pm
Offline
User avatar
Posts: 307
Joined: July 29th, 2010, 2:47 am
Location: South Carolina
Contact: Website
Wonderful drawing and fascinating site.

_________________
"If you want to have dinner with the Devil, make sure to bring a long spoon!"
The New Wolf's Shipyard
The New Wolf's Shipyard Forum


Top
[Profile] [Quote]
DigitalShipyard
Post subject: Re: Three Masted Schooner ProjectPosted: March 12th, 2012, 12:07 pm
Offline
Posts: 30
Joined: July 28th, 2011, 2:26 pm
Location: Michigan
Contact: Website
Thanks Guys!


Top
[Profile] [Quote]
Display: Sort by: Direction:
[Post Reply]  Page 1 of 1  [ 8 posts ]  Return to “Non-Shipbucket Drawings”

Jump to: 

Who is online

Users browsing this forum: No registered users and 51 guests


The team | Delete all board cookies | All times are UTC


cron
Powered by phpBB® Forum Software © phpBB Limited
[ GZIP: Off ]