Shipbucket
http://www.shipbucket.com/forums/

Real Gunbucket For Real Designs
http://www.shipbucket.com/forums/viewtopic.php?f=19&t=301		 Page 122 of 166
Author:  Colosseum [ January 16th, 2020, 5:20 pm ]
Post subject:  Re: Real Gunbucket For Real Designs
Cool. Are you sure the CAR-15 / XM-177 stock is tapered at the rear? Every real example I've ever seen is straight/flat.
Author:  dalamace [ January 21st, 2020, 2:47 pm ]
Post subject:  Re: Real Gunbucket For Real Designs
Hello,

Yeah, it would seem to be flat, sorry about that. Pardon my mistakes, I haven't really seen a lot of guns in real life barring a few of them in museums and airsofts let alone actually shooting any! Here's a fix of the Gen 2 Telescoping Stock in the XM177E2... Thanks for pointing it out, Colosseum!

[ img ]

And to take a break from all the Colts, an MSG90A1, drawn from Darth Panda's G3 Rifle. It lacks a bipod and the Hensoldt telescopic sight as was advertised to be optional accessory from the factory. The MSG90A1 is pretty much the military variant of the PSG-1 and my personal preference just because how it looks. It have some dovetail mounts which I hope placed correctly because there're barely any pics of it without any scope of some kind.

[ img ]

At any rate, here's the XM4 Carbine, a drawing that oddly take a tad longer than usual because I am genuinely stumped by it about the lenght. For some reason wikipedia states it's some 29.5 inches long with the stock retracted but the US Army states it's 30.47?

[ img ]

If there's any mistakes please point them out.

Thank You!
Author:  SouprRacwn [ January 22nd, 2020, 4:29 am ]
Post subject:  Re: Real Gunbucket For Real Designs
Splendid work on the MSG90A1.

A little bird told me that the HK21 is still up in the air. Perhaps we could see specifically the HK21E?
Author:  reytuerto [ January 22nd, 2020, 3:33 pm ]
Post subject:  Re: Real Gunbucket For Real Designs
Fantastic work with the HK rifle! I hope to see soon the same rifle with an scope! :D
Author:  dalamace [ January 25th, 2020, 1:37 pm ]
Post subject:  Re: Real Gunbucket For Real Designs
Hello,

Thanks for the feedbacks! As for the HK21E, I won't promise anything but I might dabble in the HK21 at least.

At any rate, today I have the HK PSG1, the predecessor of the MSG90A1, known for its use by the GSG-9 as an anti-terrorist weapon.

[ img ]

And the FR F1, the French sniper rifle based loosely on the MAS-36 to replace the MAS-49's sniper variant.

[ img ]

If there're any mistakes, especially in regard to the colours of the wooden furniture, please do point them out!

Thank You!
Author:  eswube [ January 26th, 2020, 4:38 pm ]
Post subject:  Re: Real Gunbucket For Real Designs
Very nice additions, as usual.
Author:  dalamace [ February 3rd, 2020, 1:24 am ]
Post subject:  Re: Real Gunbucket For Real Designs
Hello,

Going away from wood and steel to polymers, I present the Kriss Vector, a radical looking gun to say the least. This is the SMG variant chambered in .45 ACP and with the short magazine.

[ img ]

Thank You!
Author:  eswube [ February 4th, 2020, 8:40 pm ]
Post subject:  Re: Real Gunbucket For Real Designs
"Radical looking" is a very polite understatement. ;)
Good work.
Author:  dalamace [ February 11th, 2020, 12:24 am ]
Post subject:  Re: Real Gunbucket For Real Designs
Hello,

Thanks Eswube, the Vector certainly do look... special.

So, instead of probably filling up this thread with the hundreds of little variants of the military AR-15 models (thanks Colt), I decide to make a giant masterlist of sort. I hope to update Colosseum's own M16 component list including attachments or make a new thread for the AR-15s/M16s variants even.

[ img ]

Although I try to be as precise as possible, I do admit that a few bits and bobs are missing, including the gas tube. Also, if you do use the components to kitbash an AR-15, it's probably good to double check on measurements. The barrels and handguards are especially suspect in my opinion.

And since people are probably sick of AR-15s, here's the MAT-49/54, the police variant of the MAT-49. I don't know why the French decide to have the wire stock turned into a wooden one especially since the police variant of the MAT-38 had a wire one...

[ img ]

Thank You!
Author:  SouprRacwn [ February 15th, 2020, 4:27 am ]
Post subject:  Re: Real Gunbucket For Real Designs
[ img ]
While we're waiting on what Dalamace wants to do next, I finished the HK33.
Page 122 of 166 All times are UTC
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/