Shipbucket
http://www.shipbucket.com/forums/

Dutch parts sheet
http://www.shipbucket.com/forums/viewtopic.php?f=23&t=1307		 Page 2 of 11
Author:  paul_541 [ July 6th, 2011, 1:26 am ]
Post subject:  Re: dutch made parts sheet
Isn't my new SPS-49 that I see ? It has a dutch version ??? :shock:

Greetings. ;)
Author:  TimothyC [ July 6th, 2011, 2:22 am ]
Post subject:  Re: dutch made parts sheet
paul_541 wrote:
Isn't my new SPS-49 that I see ? It has a dutch version ??? :shock:

Greetings. ;)

No. That's a radar that your 'new SPS-49' drawing is a better representation of than an SPS-49. There is no new SPS-49 drawing. The only way we're getting a new SPS-49 drawing is if it get approved by Erik_T, as he is the master of all shipbucket USN radar sets (this is actually mentioned on the USN radar sheet).
Author:  paul_541 [ July 6th, 2011, 2:49 am ]
Post subject:  Re: dutch made parts sheet
TimothyC wrote:

No. That's a radar that your 'new SPS-49' drawing is a better representation of than an SPS-49. There is no new SPS-49 drawing. The only way we're getting a new SPS-49 drawing is if it get approved by Erik_T, as he is the master of all shipbucket USN radar sets (this is actually mentioned on the USN radar sheet).
OK, I will talk about this with Erik_T for approve it. :)

Greetings. ;)
Author:  acelanceloet [ July 6th, 2011, 8:01 am ]
Post subject:  Re: dutch made parts sheet
erik_t wrote:
Presumably Seamaster 400 can handle any sort of target designation/illumination/etc that indigenous SAMs might require?
most likely. it is not mentioned in the data sheets I have seen. one things is for sure though: the I-mast has no radars that serve as directors only. so I think the SMILE (seamaster) can do illumination too, at least for guns (as there is no ship build yet with I-mast and missiles)
it is possible, that with missiles, an director would be placed on top (such as I drew) or that an apart director would be added. but most likely the SMILE does it, indeed.

also, what is that talk about the SPS-49 in this thread?
Author:  acelanceloet [ September 23rd, 2011, 8:51 pm ]
Post subject:  SMART-S mk 1 new drawing
[ img ]
I'd like some opinions on this one. I will be redoing the mk 2 as well.
EDIT: some fixes and the top view
Author:  acelanceloet [ October 17th, 2011, 3:05 pm ]
Post subject:  SMART-S mk 2 new drawing
[ img ]
and the mk 2.... top view is WIP, will come soon.
Author:  heuhen [ October 17th, 2011, 3:07 pm ]
Post subject:  Re: SMART-S mk 2 new drawing
acelanceloet wrote:
[ img ]
and the mk 2.... top view is WIP, will come soon.
I love toop wiew!
Author:  acelanceloet [ October 17th, 2011, 6:08 pm ]
Post subject:  Re: Dutch parts sheet
updated the sheet: v 1.1 now.
Author:  MC Spoilt B'stard [ October 19th, 2011, 12:52 pm ]
Post subject:  Re: Dutch parts sheet
A few weeks ago i found this photo on the website of the belgium navy, it showed a NH-90 NFH dummy being used in Den helder (NL) on the M-frigate's for testing purposes. Never heard of it or seen it before so. Last night i was up to early so decided to make it and this is what it is:

[ img ]
[ img ]
[ img ]

[ img ]
Tried to do my best (posted it in the Dutch partsheets because i dont know if more of these models ar around)
Author:  ALVAMA [ October 19th, 2011, 12:57 pm ]
Post subject:  Re: Dutch parts sheet
Very interested! Would be great to see a Holland drawing fitted with this!
Page 2 of 11 All times are UTC
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/