[Post Reply] [*]  Page 4 of 11  [ 106 posts ]  Go to page « 1 2 3 4 5 611 »
Author Message
MihoshiK
Post subject: Re: Dutch parts sheetPosted: March 4th, 2012, 1:32 pm
Offline
User avatar
Posts: 1004
Joined: October 16th, 2010, 11:06 pm
Location: In orbit, watching you draw.
Contact: Website
acelanceloet wrote:
MihoshiK wrote:
acelanceloet wrote:
did an small update again, mostly for the new LW-08 that is correctly sized. for the other changes, look at the changelog.
?In what way was the previous LW-08 too large? The Stabilisation mechanism was slightly exxagerated, but that was for detail's sake. The antenna should have been corectly sized?
sigh. I expected something like this.
it was redrawn by mitch, controlled by alvama and recommended by golly. I myself would rather keep the old one (just for the sake of parts standardisation, if nothing else) still, against all this might, I had no other choice then to swap them.......
it was 4 pixels too wide, 3 pixels too wide or something like that....
Mitch is a non-entity here. And seriously? I too did my homework, and that Antenna should be fine. Some people just fuck around with things for the sake of fucking around, and add nothing useful. Frankly, it looks horrible, especially the stabilisation mount.

_________________
Would you please not eat my gun...
[ img ]


Top
[Profile] [Quote]
acelanceloet
Post subject: Re: Dutch parts sheetPosted: March 7th, 2012, 1:17 pm
Offline
User avatar
Posts: 7194
Joined: July 28th, 2010, 12:25 pm
Location: the netherlands
after some discussion with miho and other members of the moderating team it was decided that mihoshik's LW-08 stays. it has been modified on the parts sheet again.

_________________
Drawings are credited with J.Scholtens
I ask of you to prove me wrong. Not say I am wrong, but prove it, because then I will have learned something new.


Top
[Profile] [Quote]
rifleman
Post subject: Re: Dutch parts sheetPosted: March 14th, 2012, 8:33 pm
Offline
Posts: 501
Joined: September 4th, 2010, 8:44 am
why doesn't 1-3-1 work in paintshop pro7?

_________________
"There was nothing wrong with Titanic when she left the Shipyard" Tim McGarry Belfast Comedian


Top
[Profile] [Quote]
acelanceloet
Post subject: Re: Dutch parts sheetPosted: March 14th, 2012, 8:43 pm
Offline
User avatar
Posts: 7194
Joined: July 28th, 2010, 12:25 pm
Location: the netherlands
this sometimes happends because of the program I use. the easiest fix for this is to open the file in MS paint and copy the entire sheet (or the parts you need) to paintshop pro.

_________________
Drawings are credited with J.Scholtens
I ask of you to prove me wrong. Not say I am wrong, but prove it, because then I will have learned something new.


Top
[Profile] [Quote]
rifleman
Post subject: Re: Dutch parts sheetPosted: March 14th, 2012, 8:57 pm
Offline
Posts: 501
Joined: September 4th, 2010, 8:44 am
tried that didn't work

_________________
"There was nothing wrong with Titanic when she left the Shipyard" Tim McGarry Belfast Comedian


Top
[Profile] [Quote]
acelanceloet
Post subject: Re: Dutch parts sheetPosted: March 14th, 2012, 9:00 pm
Offline
User avatar
Posts: 7194
Joined: July 28th, 2010, 12:25 pm
Location: the netherlands
you cannot open it in paint either, or you cannot copy? please describe whatever happends?

_________________
Drawings are credited with J.Scholtens
I ask of you to prove me wrong. Not say I am wrong, but prove it, because then I will have learned something new.


Top
[Profile] [Quote]
rifleman
Post subject: Re: Dutch parts sheetPosted: March 14th, 2012, 9:18 pm
Offline
Posts: 501
Joined: September 4th, 2010, 8:44 am
It opens in paint I save it to pictures directory in PNG and it won't open from pictures in Paint Shop Prop. Sorted it out by changing format to JPG then converted it in Paint shop Pro to PNG

_________________
"There was nothing wrong with Titanic when she left the Shipyard" Tim McGarry Belfast Comedian


Top
[Profile] [Quote]
rifleman
Post subject: Re: Dutch parts sheetPosted: May 14th, 2012, 3:43 pm
Offline
Posts: 501
Joined: September 4th, 2010, 8:44 am
Looking at the various Radars on the SIGMA type vessels is anyone doing the new LW08 and LIROD antenna?

_________________
"There was nothing wrong with Titanic when she left the Shipyard" Tim McGarry Belfast Comedian


Top
[Profile] [Quote]
acelanceloet
Post subject: Re: Dutch parts sheetPosted: May 14th, 2012, 4:00 pm
Offline
User avatar
Posts: 7194
Joined: July 28th, 2010, 12:25 pm
Location: the netherlands
why would those need redo? especially LW-08 does not need it, as it is basically an brand new drawing from late 2011
LIROD is good as it is, from around 2010-2011, as it is on the sigma's. it needs to be on this sheet though..... I now see it is not

wondering on which sigma you saw an LW-08 btw xD

EDIT: are you working on an sigma? I do not know of any that are not on anyones worklist...... except for the new indonesion 'destroyer' 10514 variant.

_________________
Drawings are credited with J.Scholtens
I ask of you to prove me wrong. Not say I am wrong, but prove it, because then I will have learned something new.


Top
[Profile] [Quote]
odysseus1980
Post subject: Re: Dutch parts sheetPosted: May 14th, 2012, 7:03 pm
Offline
User avatar
Posts: 3285
Joined: November 8th, 2010, 8:53 am
Location: Athens,Hellenic Kingdom
Which design to use for the first generation LW-08?That Kortenaer frigates had when built.These radars in my scenario passed to other ships to replace the old SPS-40 (during Elli Class modernation AU).


Last edited by odysseus1980 on May 14th, 2012, 7:05 pm, edited 1 time in total.

Top
[Profile] [Quote]
Display: Sort by: Direction:
[Post Reply]  Page 4 of 11  [ 106 posts ]  Return to “Official Parts Sheets” | Go to page « 1 2 3 4 5 611 »

Jump to: 

Who is online

Users browsing this forum: No registered users and 3 guests


The team | Delete all board cookies | All times are UTC


cron
Powered by phpBB® Forum Software © phpBB Limited
[ GZIP: Off ]