Shipbucket
http://www.shipbucket.com/forums/

FD Scale Vehicles 6
http://www.shipbucket.com/forums/viewtopic.php?f=27&t=4092		 Page 28 of 50
Author:  Naixoterk [ July 19th, 2013, 10:30 pm ]
Post subject:  Re: FD Scale Vehicles 6
One question: If the turret is in the center of the vehicle, and considering that i'm drawing one of it's sides... Then, should the turret be coloured as if it was shadowed?
Author:  Caddaric79 [ July 20th, 2013, 4:54 am ]
Post subject:  Re: FD Scale Vehicles 6
Radar maintenance Van 9V891M1
[ img ]
Author:  Caddaric79 [ July 20th, 2013, 5:37 am ]
Post subject:  Re: FD Scale Vehicles 6
Generator set on trailer PES-100-T
[ img ]
Author:  Rhade [ July 20th, 2013, 8:21 am ]
Post subject:  Re: FD Scale Vehicles 6
Naixoterk wrote:
One question: If the turret is in the center of the vehicle, and considering that i'm drawing one of it's sides... Then, should the turret be coloured as if it was shadowed?
No, why ?
Author:  eswube [ July 20th, 2013, 8:33 am ]
Post subject:  Re: FD Scale Vehicles 6
Excellent additions! :)
Author:  Hood [ July 20th, 2013, 9:02 am ]
Post subject:  Re: FD Scale Vehicles 6
Agreed. Excellent additions guys. These Soviet support vehicles are fascinating.
Author:  heuhen [ July 20th, 2013, 10:35 am ]
Post subject:  Re: FD Scale Vehicles 6
Naixoterk wrote:
One question: If the turret is in the center of the vehicle, and considering that i'm drawing one of it's sides... Then, should the turret be coloured as if it was shadowed?
today's little tip:

1. take the cup you are drinking your Vodka from and place it in the middle of a table.
2. turn off all light so it is totally dark in the room.
3. take a flashlight or a small lamp that doesn't give so much light and place it in one end of the table.
4. now watch how the light hit the cup, where is it light where is it dark (the dark part is the shade)
5. move the light around and see hove the shade behave when the light source comes from different angles.

This "a-play" to absolutely everything we see around in the world.

try to do it with two light source and see what happens then.
Author:  Naixoterk [ July 20th, 2013, 12:11 pm ]
Post subject:  Re: FD Scale Vehicles 6
Rhade wrote:
Naixoterk wrote:
One question: If the turret is in the center of the vehicle, and considering that i'm drawing one of it's sides... Then, should the turret be coloured as if it was shadowed?
No, why ?
Because of this:

[ img ]

And, since the first half of the turret is round but the second half (from the MG up to the first quarter) isn't, and considering that it's not close to the vehicle's roof border i had a doubt.

BTW i'm not revealing the name of this armoured car yet. Why? because i',m evil MUHAHAHAHAHA.
Author:  Caddaric79 [ July 20th, 2013, 12:59 pm ]
Post subject:  Re: FD Scale Vehicles 6
PT-34 Mine Roler Tank
[ img ]
Author:  Rhade [ July 20th, 2013, 1:14 pm ]
Post subject:  Re: FD Scale Vehicles 6
Naixoterk wrote:
And, since the first half of the turret is round but the second half (from the MG up to the first quarter) isn't, and considering that it's not close to the vehicle's roof border i had a doubt.
Ooooohhh... hmmm

I think that you need to look at ships gun turrets and how our artist put shadows on them.

EDIT: Caddaric as always wonderful job.
Page 28 of 50 All times are UTC
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/