Moderator: Community Manager
[Locked] [*]  Page 4 of 55  [ 548 posts ]  Go to page « 1 2 3 4 5 655 »
Author Message
eswube
Post subject: Re: FD scale vehicles 10Posted: January 10th, 2017, 10:01 pm
Offline
Posts: 10624
Joined: June 15th, 2011, 8:31 am
Great additions! :)


Top
[Profile]
Nestin
Post subject: Re: FD scale vehicles 10Posted: January 11th, 2017, 10:28 pm
Offline
User avatar
Posts: 234
Joined: July 10th, 2015, 10:22 am
Ok, let's get some three-axle trucks :)

FAP 2226 is the first series of 6x4 truck with NG technology made by FAP. It was mostly produced as dump truck, the FAP 2226 RBK. There were also other versions, as fire engine, fuel tank, concrete mixer, tow truck and semi-trailer truck - FAP 2226 RBDT.

[ img ]
[ img ]
[ img ]
[ img ]
[ img ]
[ img ]
[ img ]

For this also please replace old FAP 2226 links with this new one :)


Last edited by Nestin on February 17th, 2017, 6:46 pm, edited 1 time in total.

Top
[Profile]
eswube
Post subject: Re: FD scale vehicles 10Posted: January 12th, 2017, 9:49 pm
Offline
Posts: 10624
Joined: June 15th, 2011, 8:31 am
They are excellent! Keep it up! :)


Top
[Profile]
reytuerto
Post subject: Re: FD scale vehicles 10Posted: January 14th, 2017, 2:53 am
Offline
User avatar
Posts: 1519
Joined: February 21st, 2015, 12:03 am
Good Evening:
The following gun is the french canon de 155 mm de Bange Mle 1877. A long lasting gun, because it saw several wars, until the end of WWII.
[ img ]
As a siege and fortress gun, from 1883 it was necesary an hydropneumatic cilinder attached to the carriage and to a wooden plataform. But as field gun, the only mean for dealing with the recoil was a pair of wooden ramps behind the wheels. But in the French Army it was numerically important until mid WWI as counterbattery artillery.
The boer 155 Long Tom is a close related gun, also designed by de Bange, but built by Schneider. Cheers.

PS: Once again, thanks to Eswube! I'm enjoing the «french harvest». :lol:


Last edited by reytuerto on January 14th, 2017, 2:30 pm, edited 1 time in total.

Top
[Profile]
Nestin
Post subject: Re: FD scale vehicles 10Posted: January 14th, 2017, 10:39 am
Offline
User avatar
Posts: 234
Joined: July 10th, 2015, 10:22 am
Very nice cannon :) Do you plan 80mm de Bange Mle 1877?


Top
[Profile]
reytuerto
Post subject: Re: FD scale vehicles 10Posted: January 14th, 2017, 1:50 pm
Offline
User avatar
Posts: 1519
Joined: February 21st, 2015, 12:03 am
Thanks Nestin, but not as detailed as your trucks! ;)

I have a close relative of that gun ( 90 mm de Bange), but it is in a very huge scale (almost 10 times its size in FD scale) so it is difficult to resize it (I'm doing it slowly -I mean, very slowly- because after a 60 or 70% reduction, I redraw must the gun. But until now I had reduced it 2 times only :oops: and I am still far to reach the actual length of the barrel). I think that it can be ready for May or June, after some siege gun and mortars, an aircraft in FD scale, and an american old patrol gunboat and a peruvian auxiliar cruiser both in SB scale. Cheers.


Top
[Profile]
adenandy
Post subject: Re: FD scale vehicles 10Posted: January 14th, 2017, 10:11 pm
Offline
Posts: 1611
Joined: July 23rd, 2011, 1:46 am
EXCELLENT stuff Nestin and Reytuerto :!:

Extremely well done chums :D

_________________
https://discord.gg/5PHq8Dk
My artwork is posted here: https://www.deviantart.com/adenandy/gallery/all


Top
[Profile]
pegasus206
Post subject: Re: FD scale vehicles 10Posted: January 14th, 2017, 10:25 pm
Offline
Posts: 930
Joined: October 17th, 2013, 5:22 pm
Location: Focsani, Romania
Nice work Nestin and reytuerto :D :D :D :D :D

_________________
___________________________________________

Best Regards,
Aart.

Projects:

The Kingdom of Rochfort in FD


Top
[Profile]
ABetterName
Post subject: Re: FD scale vehicles 10Posted: January 15th, 2017, 12:49 am
Offline
User avatar
Posts: 370
Joined: April 16th, 2015, 7:39 pm
Location: Konugenshafn, Nyrdanmark
Here is a something.

[ img ]

_________________
"The first phase of the operation did not go as planned." - Anonymous
[ img ]


Top
[Profile]
Nestin
Post subject: Re: FD scale vehicles 10Posted: January 15th, 2017, 12:06 pm
Offline
User avatar
Posts: 234
Joined: July 10th, 2015, 10:22 am
reytuerto wrote:
Thanks Nestin, but not as detailed as your trucks! ;)

I have a close relative of that gun ( 90 mm de Bange), but it is in a very huge scale (almost 10 times its size in FD scale) so it is difficult to resize it (I'm doing it slowly -I mean, very slowly- because after a 60 or 70% reduction, I redraw must the gun. But until now I had reduced it 2 times only :oops: and I am still far to reach the actual length of the barrel). I think that it can be ready for May or June, after some siege gun and mortars, an aircraft in FD scale, and an american old patrol gunboat and a peruvian auxiliar cruiser both in SB scale. Cheers.
I understand, some work takes time and we must to be patient :)

Here I continue with my work, the next is FAP 2626, developed from FAP 2226 as model with bigger load capacity, but which has shown the 260hp engine not really enough for that weight of truck. It was not producet in large series due it was replaced with more powerful models. The "mulden" dump truck was exported in large number in to African countries which were traditional customers of FAP for mining companies. Some models for some countries had left steering wheel.

[ img ]
[ img ]
[ img ]
[ img ]

p.s. please also to replace old drawings of FAP 2626 links with this new one :)


Top
[Profile]
Display: Sort by: Direction:
[Locked]  Page 4 of 55  [ 548 posts ]  Return to “FD Scale Drawings” | Go to page « 1 2 3 4 5 655 »

Jump to: 

Who is online

Users browsing this forum: APDAF and 27 guests


The team | Delete all board cookies | All times are UTC


Powered by phpBB® Forum Software © phpBB Limited
[ GZIP: Off ]