[Post Reply] [*]  Page 7 of 9  [ 85 posts ]  Go to page « 15 6 7 8 9 »
Author Message
NickD
Post subject: Re: HDMS Tordenskjold Type 14E frigate R/C modelPosted: June 19th, 2019, 9:35 pm
Offline
User avatar
Posts: 92
Joined: July 27th, 2010, 7:30 pm
Location: Varna, BG
Contact: ICQ, Website
Here, what I found in my archive. Shame to say, but it is a real mess and hard to find something. But luckily i had a success: some for 40 mm Bofors and one with 57mm Bofors Mk 1.
https://i.imgur.com/X8WCRGt.jpg
https://i.imgur.com/KdvHOpN.jpg
https://i.imgur.com/bO0AkFW.jpg
https://i.imgur.com/LHFwPF1.jpg
https://i.imgur.com/XjLLnHe.png
https://i.imgur.com/8oAlKO0.png
https://i.imgur.com/w2wb8vg.png
https://i.imgur.com/bFmfyNr.png
https://i.imgur.com/KFVfNBk.png

Unfortunately, there is nothing serious for 3 inch Mk 33. I purchased it from here:
https://www.shapeways.com/product/5JVFH ... d=43575186
There is 3D-view and dimensions. I can measure the mounts for myself too, if you want.


Top
[Profile] [Quote]
heuhen
Post subject: Re: HDMS Tordenskjold Type 14E frigate R/C modelPosted: June 20th, 2019, 7:53 pm
Offline
User avatar
Posts: 8319
Joined: December 15th, 2010, 10:13 pm
Location: Behind you, looking at you with my mustache!
NickD wrote: *
There is 3D-view and dimensions. I can measure the mounts for myself too, if you want.

It would help a lot, when I updating the drawing to correct scale.


Top
[Profile] [Quote]
NickD
Post subject: Re: HDMS Tordenskjold Type 14E frigate R/C modelPosted: June 21st, 2019, 9:13 pm
Offline
User avatar
Posts: 92
Joined: July 27th, 2010, 7:30 pm
Location: Varna, BG
Contact: ICQ, Website
Мк 33 3 inch mount
length with/without barrels: 5.62 m / 3.70 m
width: 4.51 m
height (w/o roof dome): 2.98 m

Bofors L70
length with/without barrels: 4.27 m / 2.16 m
width: 2.30 m
height: 2.40 m


Top
[Profile] [Quote]
heuhen
Post subject: Re: HDMS Tordenskjold Type 14E frigate R/C modelPosted: June 21st, 2019, 10:11 pm
Offline
User avatar
Posts: 8319
Joined: December 15th, 2010, 10:13 pm
Location: Behind you, looking at you with my mustache!
NickD wrote: *
Мк 33 3 inch mount
length with/without barrels: 5.62 m / 3.70 m
width: 4.51 m
height (w/o roof dome): 2.98 m

Bofors L70
length with/without barrels: 4.27 m / 2.16 m
width: 2.30 m
height: 2.40 m
thanks


Top
[Profile] [Quote]
NickD
Post subject: Re: HDMS Tordenskjold Type 14E frigate R/C modelPosted: June 22nd, 2019, 2:26 pm
Offline
User avatar
Posts: 92
Joined: July 27th, 2010, 7:30 pm
Location: Varna, BG
Contact: ICQ, Website
Prototyping of the central superstructure - first iteration (paper).
A height of the standard director platform seems to be not enough. Another half of a meter will be needed.
Oerlikon nests used raising tubes, because these guns intended to engage surface targets.
Possibly I can add safely another 30 cm width each side to ensure a little more space for the loader to operate easily.
Now ammo storage rack is single, for both guns, maybe I can enlarge the ammo rack platform to the funnel side and add there one or two more ammo boxes.
Any suggestions and corrections are welcome!
[ img ]
[ img ]
[ img ]
[ img ]
[ img ]
[ img ]
[ img ]
[ img ]
[ img ]
[ img ]
[ img ]
[ img ]
[ img ]


Top
[Profile] [Quote]
eswube
Post subject: Re: HDMS Tordenskjold Type 14E frigate R/C modelPosted: June 23rd, 2019, 1:55 pm
Offline
User avatar
Posts: 9109
Joined: June 15th, 2011, 8:31 am
Contact: Website
I don't feel competent to give any advice, but I like what I see.

_________________
My very neglected Deviantart page


Top
[Profile] [Quote]
Hood
Post subject: Re: HDMS Tordenskjold Type 14E frigate R/C modelPosted: June 26th, 2019, 7:57 am
Offline
Posts: 6291
Joined: July 31st, 2010, 10:07 am
Looks like great progress and the layout looks good.

_________________
Hood's Worklist
English Electric Canberra FD
Interwar RN Capital Ships
Super-Darings
Never-Were British Aircraft


Top
[Profile] [Quote]
NickD
Post subject: Re: HDMS Tordenskjold Type 14E frigate R/C modelPosted: September 10th, 2019, 7:03 pm
Offline
User avatar
Posts: 92
Joined: July 27th, 2010, 7:30 pm
Location: Varna, BG
Contact: ICQ, Website
Excuse me for the long delay!
The work continues, but not too much things worthy of a photo.
The hull is complete, now preparations for the painting goes on. Too much sanding these days. :)
Some other details are ready for 3D-printing, I will order them soon. You can see the bridge and mix of some tiny details - loudspeakers, deck lamps, handrail knobs and two types of rope craddles. More will be ready soon.

[ img ]

[ img ]

[ img ]


Top
[Profile] [Quote]
eswube
Post subject: Re: HDMS Tordenskjold Type 14E frigate R/C modelPosted: September 10th, 2019, 7:43 pm
Offline
User avatar
Posts: 9109
Joined: June 15th, 2011, 8:31 am
Contact: Website
Wow! Don't be so modest. It is "worthy of a photo". :D

_________________
My very neglected Deviantart page


Top
[Profile] [Quote]
NickD
Post subject: Re: HDMS Tordenskjold Type 14E frigate R/C modelPosted: September 10th, 2019, 8:37 pm
Offline
User avatar
Posts: 92
Joined: July 27th, 2010, 7:30 pm
Location: Varna, BG
Contact: ICQ, Website
Thanks! I mean, there is no so much visible changes. But hull is completely closed, all systems working and checked (the only exception is the radar - it needs a mast to be mounted, but its motor working, still hidden in the hull).
So everything i will do from now on will be on the exterior :)


Top
[Profile] [Quote]
Display: Sort by: Direction:
[Post Reply]  Page 7 of 9  [ 85 posts ]  Return to “Non-Shipbucket Drawings” | Go to page « 15 6 7 8 9 »

Jump to: 

Who is online

Users browsing this forum: No registered users and 3 guests


The team | Delete all board cookies | All times are UTC


cron
Powered by phpBB® Forum Software © phpBB Limited
[ GZIP: Off ]